REMOVE FORWARD LANDING GEAR AXLE (Continued)

TM 55-1520-240-23-3 3-14 REMOVE FORWARD LANDING GEAR AXLE (Continued) 3-14 Dry cleaning solvent (E162) is flammable and toxic. It can irritate skin and cause burns. Use only in well-ventilated area away from heat and open flame. In case of contact, immediately flush skin or eyes with water for at least 15 minutes. Get medical attention for eyes. NOTE Procedure is same for removing left or right inboard or outboard forward landing gear axle. Left side outboard is shown here. 1. Clean grease from axle (1) with solvent (E162) and cloths (E120). Wear gloves (E186). 2. Remove two cotter pins (2) and nuts (3). 3. Remove bracket (4) from inboard axle (1). 4. Remove bolts (6). 5. Remove two axles (1) from shock strut (8). Use mallet. FOLLOW-ON MAINTENANCE: Inspect axle (Task 3-13). END OF TASK 3-51