INSTALL LANDING GEAR TIRE AND TUBE (Continued)

TM 55-1520-240-23-3 3-11 INSTALL LANDING GEAR TIRE AND TUBE (Continued) 3-11 WARNING Dry cleaning solvent (E162) is flammable and toxic. It can irritate skin and cause burns. Use only in well-ventilated area, away from heat and open flame. In case of contact, immediately flush skin or eyes with water for at least 15 minutes. Get medical attention for eyes. NOTE Procedure is same for installing all landing gear tires and tubes. 1. Clean wheel halves (1) and (2) with solvent (E162) and cloths (E120). Wear gloves (E184.1). Wipe rims dry. 2. Clean dust and foreign materials from inside of tire (3). Use cloths (E120). 3. Install valve core (4) in valve (5). 4. Inflate tube (6) part way. Insert tube in tire (3). 4.1. Install packing (6.1) in groove of outer wheel half (2). Change 1 3-35