|
| |
Back
REMOVE AFT LANDING GEAR WHEEL AND TIRE ASSEMBLY (Continued) | Up
TM-55-1520-240-23-3 CH-47D Heilcopter Manual | Next
REMOVE LANDING GEAR TIRE AND TUBE |
TM 55-1520-240-23-3
3-7.1
REMOVE AFT LANDING GEAR WHEEL AND TIRE ASSEMBLY (Continued)
3-7.1
4.
Remove two seals (10) and bearings (11).
5.
Clean two seals (10) with dry cloths (E120).
WARNING
Solvent (E162) is flammable and
toxic. It can irritate skin and cause
burns. Use only in well-ventilated
area, away from heat and open flame.
In case of contact, immediately flush
skin or eyes with water for at least
15 minutes. Get medical attention
for eyes.
6.
Clean bearings (11) and two cups (12) in wheel
(13). Use dry cleaning solvent (E162). Dry with
cloth (E120).
7.
Check bearings (11) and cups (12) for corrosion,
nicks, burrs, and cracks (TM 1-1500-204-23,
TM 55-1500-322-24).
8.
Check seals (10) for damaged sealing lip.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
3-27
|
