INSTALL FORWARD LANDING GEAR

TM 55-1520-240-23-3 3-6 INSTALL FORWARD LANDING GEAR 3-6 INITIAL SETUP Applicable Configurations: All Tools: Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692 Floor Hoist Torque Wrench, 0 To 600 Foot-Pounds Socket, 1-3/16 Inch Socket, 1-3/8 Inch Socket, 1-1/16 Inch Extension, 9 Inch Eddy Current Inspection Unit Materials: Antiseize Compound (E75) Cloth (E120) Dry Cleaning Solvent (E162) Gloves (E186) Personnel Required: Medium Helicopter Repairer (2) Inspector References: Task 2-8 Task 3-3 Task 7-7 Task 7-70 Task 7-72 Task 7-330 Task 10-56 Task 10-88.2 TM 55-1520-240-23P TM 1-1520-253-23 INSTALL LEFT OR RIGHT GEAR Dry cleaning solvent (E162) is flammable and gives off toxic fumes. It may irritate skin and cause burns. Use only in well-ventilated area away from heat and open flame. In case of contact, immediately flush skin or eyes with water for at least 15 minutes. Get medical attention for eyes. NOTE To convert a forward landing gear to an opposite assembly, refer to Task 3-3. 1. Clean landing gear support structure (1) with solvent (E162). Wear gloves (E186). NO BREAK - WORK HARDER NO BREAK - WORK HARDER NO BREAK - WORK HARDER NO BREAK - WORK HARDER NO BREAK - WORK HARDER NO BREAK - WORK HARDER NO BREAK - WORK HARDER 3-18