INSTALL FIRE PULL CONTROL (Continued)

TM 55-1520-240-23-10 12-18 INSTALL FIRE PULL CONTROL (Continued) 12-18 4. Pull out shaft (1). 5. Check continuity between terminal (2) and terminal (5). 6. Repeat step 5 for each switch (4). INSTALL CONTROL 7. Connect eight electrical wires (6) to switches (4). Install eight screws (7) and washers (8). Remove tags from wires. 8. Install packing (9) on control (10). 9. Install shaft (1) through hole (11) in instrument panel (12). 10. Install two screws (13). 11. Connect warning light electrical wires (14). Use splice and insulation (E203) to make connection. Remove tags from wires. INSTALL FIRE WARNING PANEL 12. Position fire warning panel (15) on center instrument panel (12). 13. Install two screws (16). 14. Install two panel lights (17). INSPECT 12-50