|
| |
Back
REMOVE FIRE PULL CONTROL | Up
TM-55-1520-240-23-10 UH-1H/V and EH-1H Aircraft Manual | Next
REMOVE FIRE EXTINGUISHER SYSTEM SWITCH AND ACTUATOR ADAPTER |
TM 55-1520-240-23-10
12-15
REMOVE FIRE PULL CONTROL
(Continued)
12-15
4.
Remove two panel lights (4).
5.
Remove 11 screws (5) and washers (6) from
center instrument panel (7).
6.
Tilt panel (7) far enough to see and reach behind
it.
7.
Remove two screws (8) from fire warning panel
(9).
8.
Remove panel (9).
REMOVE CONTROL ASSEMBLY
9.
Tag and disconnect warning light electrical wires
(10) at splice.
10.
Remove two screws (11).
11.
Separate control (12) from panel (7).
12.
Tag eight electrical wires (13) connected to fire
extinguisher switches (14). Disconnect eight
wires by removing screws (15) and washers (16).
13.
Remove control (12) and packing (17).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
12-46
|
