INSTALL FIRE DETECTION SENSING ELEMENT (Continued)

TM 55-1520-240-23-10 12-13 INSTALL FIRE DETECTION SENSING ELEMENT (Continued) 12-13 INSTALL LEFT SECTION NOTE Left section of element is outboard on No. 1 engine, inboard on No. 2 engine. 26. Remove caps from element (16). 27. Bend element (16) as shown. Element must follow locations of six clamps (2) and two brackets (3 and 9). Follow guidelines in step 3 when bending element. 28. Make sure insert (10) is in connector (17), white dot (12) first. 29. Connect element (16) to connector (17) at bracket (3). 30. Install six bushings (6) on element (16), one at each clamp (2) location. Slits in bushings shall be toward outside of bends in element. 31. Press element (16) and bushing (6) into clamp (2) at six locations. Bushings shall be centered in clamps. 32. Lock each clamp (2) with fastener (7). 33. Torque end of element (16) to 65 inch-pounds. 12-41