REMOVE FIRE DETECTION SENSING ELEMENT (Continued)

TM 55-1520-240-23-10 12-12 REMOVE FIRE DETECTION SENSING ELEMENT (Continued) 12-12 REMOVE RIGHT SECTION NOTE Right section is inboard on No. 1 engine, outboard on No. 2 engine. 9. Turn fastener (1) and release cable (11) and bushing (3) from clamp (4). 10. Disconnect cable (11) from connector (12) on fuselage. Make sure insert (6) stays in connector. Cap connector. 11. Disconnect element (13) from connector (14). Make sure insert (6) stays in connector. 12. Remove lockwire and nut (15) from connector (14). Remove cable (11) and bushing (3). Remove bushing from cable. Cap cable ends. 13. Disconnect element (13) from connector (16). Make sure insert (6) stays in connector. 14. Turn fastener (1) and release element (13) and bushing (3) from clamp (4) at six locations. Remove right section of element (13). 12-35