|
| |
Back
REMOVE FIRE DETECTION CONTROL (Continued) | Up
TM-55-1520-240-23-10 UH-1H/V and EH-1H Aircraft Manual | Next
INSTALL FIRE DETECTION CONTROL (Continued) |
TM 55-1520-240-23-10
12-9
INSTALL FIRE DETECTION CONTROL
12-9
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electrical Repairer’s Tool Kit, NSN 5180-00-323-4915
Materials:
Lockwire (E231)
Personnel Required:
Aircraft Electrician
Inspector
References:
TM 55-1520-240-23P
NOTE
If installing right side control, perform
steps 1 thru 5. If installing left side
control, perform steps 6 thru 9.
RIGHT SIDE CONTROL
1.
Position control (1) on structure (2).
2.
Install slotted screw (3), two washers (4), and
nut (5).
3.
Install three crosstip screws (6), washers (4),
and nuts (5).
4.
Connect plug (7). Lockwire plug to screw (3).
Use lockwire (E231).
INSPECT
5.
Install blanket (8).
12-28
Change 1
|
