|
| |
Back
INSTALL WINDSHIELD ANTI-ICING CONTROL BOX | Up
TM-55-1520-240-23-10 UH-1H/V and EH-1H Aircraft Manual | Next
REMOVE WINDSHIELD ANTI-ICING RELAYS |
TM 55-1520-240-23-10
12-4
INSTALL WINDSHIELD ANTI-ICING CONTROL BOX
(Continued)
12-4
NOTE
Pilot, copilot, and center windshield
anti-icing control boxes are in nose
enclosure behind dynamic absorber.
Installation procedure is same for all
three. Center windshield anti-icing
control box is shown here.
1.
Position anti-icing control box (1) on structure (2)
inside nose enclosure.
2.
Install four screws (3) and washers (4).
3.
Connect electrical plug (5) to control box (1).
INSPECT
FOLLOW-ON MAINTENANCE:
Perform operational check (TM 55-1520-240-T).
Install nose dynamic absorber (Task 2-143).
END OF TASK
12-13
|
