|
| |
Back
REMOVE WINDSHIELD ANTI-ICING CONTROL BOX | Up
TM-55-1520-240-23-10 UH-1H/V and EH-1H Aircraft Manual | Next
INSTALL WINDSHIELD ANTI-ICING CONTROL BOX |
TM 55-1520-240-23-10
12-3
REMOVE WINDSHIELD ANTI-ICING CONTROL BOX
(Continued)
12-3
NOTE
Pilot, copilot, and center windshield
anti-icing control boxes are in nose
enclosure behind dynamic absorber.
Removal procedure is same for all
three. Center windshield anti-icing
control box is shown here.
1.
Disconnect electrical plug (1) from control box
(2).
2.
Remove four screws (3) and washers (4).
3.
Remove control box (2).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
12-11
|
