Table 7-2. Simulated Malfunction Details (cont)

TM 55 6930-212-10 Table 7-2. Simulated Malfunction Details - Continued Method of Indications and effects on Effects sensed by trainee introduction related systems as presented if corrective action is Malfunction by instructor to the instructor and trainee not taken XMSN OIL temp 856 (No. 1 ENG) Gradual increase in XMSN oil Gradual increase in XMSN high 857 (No. 2 ENG) temperature until temperature oil temperature until 858 (AFT XMSN) reaches 150ºC. XMSN OIL HOT temperature reaches 150�C. caution light illuminates as XMSN OIL HOT caution light temperature increases to 140ºC. illuminates as tempera- ture increases to 140�C. NOTE Instructor verifies lo- cation of metal chips. FWD XMSN 859 XMSN CHIP DET caution light XMSN CHIP DET caution metal chips illuminates steady after 5 light illuminates steady seconds of intermittent flashing. after 5 seconds of inter- mittent flashing. No. 1 ENG XMSN 860 NO. 1 ENG CHIP DET caution light NO. 1 ENG CHIP DET caution metal chips illuminates steady after 5 seconds light illuminates steady of intermittent flashing. after 5 seconds of inter- mittent flashing. No. 2 ENG metal 861 NO. 2 ENG CHIP DET caution No. 2 ENG CHIP DET caution chips light illuminates steady after light illuminates steady 5 seconds of intermittent flash- after 5 seconds of inter- ing. No. 2 engine fails after mittent flashing. No. 2 1 minute of steady illumination. engine fails after 1 min- ute of steady illumina- tion. 7-25