Table 7-2. Simulated Malfunction Details (cont)

TM 55-6930-212-10 Table 7-2. Simulated Malfunction Details - Continued Method of Indications and effects on Effects sensed by trainee introduction related systems as presented if corrective action is Malfunction by instructor to the instructor and trainee not taken Bleed band open 583 Loss of power on affected engine. Loss of power on affected No. 2 ENG N₁ and PTIT increases. If engine. N₁ and PTIT in- engine is near topping power, creases. If engine is affected engine indicates low near topping power. af- torque. fected engine indicates low torque. Bleed band popping 584 Rapid fluctuations in N₁ and Rapid fluctuations in N₁ No. 2 ENG PTIT. and PTIT. Gas producer 585 (No. 1 ENG) Engine does not respond to any Engine does not respond to actuator or engine 586 (No. 2 ENG) change in engine condition lever any change in engine con- condition lever fail movement. Appropriate engine dition lever movement. N1 control light on caution Appropriate engine N1 panel remains on when engine con- control light on caution dition lever is in any position panel remains on when other than failed position. engine condition lever is in any position other than failed position. Loss of engine oil 587 (No. 1 ENG) High engine oil temperature High engine oil tempera- 588 (No. 2 ENG) indication, low oil pressure ture indication, low oil indication, and bearing seizure pressure indication, and sound 3 minutes after start bearing seizure sound 3 of malfunction. minutes after start of malfunction. Engine oil low 589 (No. 1 ENG) NO. 1 ENG or NO. 2 ENG OIL LOW None 590 (No. 2 ENG) caution light illuminates. Metal chips 591 (No. 1 ENG) NO. 1 ENG CHIP DET caution light No. 1 engine fails after illuminates. 3 minutes. 592 (No. 2 ENG) NO. 2 ENG CHIP DET caution light None illuminates. 7-17