TM 5-6635-386-12&P (1) Proper Shipping Name: Radioactive Material, Special Form, N.O.S. (2) Hazard Class: Radioactive Material. (3) Identification Number: UN 2974. (4) Total Quantity: 1 Box. (5)  Name  of  each  Radionuclide:  Americium241, Cesium-137. (6) Form: Special Form. (7)   Activity:   60   millicuries   total,   10   millicuries Cesium-137,   50   millicuries   Americium-241      (8)   Label Required: Radioactive Yellow-l. (9) Transport Index: Use value listed on Yellow II label on box. (10)  The  following  accessories  are  to  be  included  with the testers when transporting them for repair/overhaul or to a new location: DESCRIPTION FSCM PART NO. NSN Cast Aluminum Guideplate 55492 B 200050 6635-01-043-7970 Computer Tabulations AC Charger 55492 NB-150-8 6635-01-043-7972 DC Charger (Battery Clips) 55492 A 401234 6635-01-043-7973 Sign Set 55492 W1006 9905-01-115-8157 Phillips Screwdriver 79061 P28 5120-00-542-3438 Fiberglass Case 55492 A 401228 No NSN Padlock w/2 Keys 96906 MS 35647-4 5340-00-582-2741 Standard Drill Pin 55492 A200128 6635-01-043-7971 Clipboard Assembly 55492 B 101013 7520-01-115-8066 Standard Block Assembly 55492 B 401124 No NSN Wrench, Allen Hex, 5/32 80064 1940717 5120-00-198-5392 Battery, NICAD, 8 ea 19209 41B004AA71WTABS 6140-00-497-0490 (Size D-4 Ampere hour 160F) *Some testers were issued with a hammer. If applicable, the hammer should also be included. TM 5-6635-386-12&P shall always stay with the tester even during shipment. (11)  Handle  must  be  locked  in  a  safe  position and the batteries removed before tester is shipped. (12) The key for the padlock is to be tagged with the  tester  serial  number  and  sent  by  registered  mail  to the receiving/repair facility. The key  to  the  probe  handle shall be stored inside the case. c. Additional information is required as appropriate   depending   on   the   mode   of   transportation used.   Do   not   forget   to   include   the   following   shipping certification on the shipping papers: This is to certify that the above named materials are   properly   classified,   described,   packaged,   marked and labeled and are in proper condition for transportation according to the applicable regulations of the Department of Transportation. d. The orange tester case meets the requirements  of  specification  7A  for  type  A  packaging. Type  A  packaging  is  required  for  the  tester  since  the radionuclides   are   in   special   form   and   the   amount   of activity   of   the   two   radioactive   sources   is   below   the maximum permitted for type A packaging (Al). However, to protect  from  damage  during  shipment,  the  tester  and case should be placed in a wooden crate. The outside of the  crate  must  be  labelled  and  marked  in  accordance with  Title  10  CFR  Parts  172.310,  172.403  and  438.  A complete    DD    Form    1348-1    (DOD    Sirtgle    Line    Item Release/Receipt     Document)     should     accompany     the shipment to the manufacturer. e. The Transport Index (TI) must be  marked  on the Dot Radiation label on the tester package, and on the shipping   paper.   The   TI   is   a   number   expressing   the maximum radiation level in millirem per 5-3