Figure 5-4. Status Processor Connector Identification

TM 5-6350-264-14&P-10 NAVELEX EE 181-AA-OMI-110/E121 C-9412 T.O. 31S9-2FSS9-1-10 Figure 5-4. Status Processor Connector Identification WARNING The Audible Alarm presents a noise hazard to personnel in the area. The noise level exceeds the allowable limits for unprotected personnel. Authorized protective equipment must be worn by all personnel in the work area. WARNING While performing maintenance or troubleshooting on the Control Unit, ensure that test points and terminals are never grounded or shorted to each other or to chassis. This will cause serious damage to the internal components. CAUTION When taking measurements with a multimeter, ensure that the meter is set to the proper scale and range before inserting probes into the circuit. NOTE If the Audible Alarm is installed, it must be disabled BEFORE any troubleshooting procedures are attempted. Disabling the alarm requires setting the key-operated switch on Control Unit to TEST/ RESET position, opening Audible Alarm, removing faceplate, and turning off power switch. After troubleshooting, the Audible Alarm must be reactivated. Activating the Alarm requires setting the key operated switch on Control Unit to TEST/RESET position, turning Alarm power switch on, replacing faceplate, closing and locking Audible Alarm door. 5-6