Figure 2-10. ULV Boom Pressure Adjustment

TM 5-3740-218-13&P (12) Remove nozzle, pressure gage, and test tee. Install nozzle back in boom. b. ULV System Boom Assembly Pressure Adjustment. WARNING Personnel handling solid or liquid pesticides shall use appropriate personal protective equipment consisting of respirators, coveralls, rubber gloves, goggles, etc., as required by type of pesticide used and in accordance with manufacturer's label directions. Avoid direct contact with pesticide. Observe all warnings on label. Handle pesticide in well- ventilated area. Failure to do so could result in personal injury. NOTE All initial tests should be performed with water only. All following tests for calibration should be performed with pesticide. (1) Remove fitting (1) from rotary atomizer nozzle (2) and install test tee (3), pressure gage (4), and fitting (1) as shown in figure 2-10. Figure 2-10. ULV Boom Pressure Adjustment 2-28