TM 5-3740-218-13&P Table 2-4.  Operator Level PMCS (Cont) NOTE:  Within designated interval, these checks are to be performed in the order listed. B-Before D-During A-After B D A • • Strainer Check for cleanliness; clean with Strainer plugged. water or appropriate solvent. • • Pump and Check hydraulic couplings for Fails to operate. Crosstube correct location and secureness of Spray hookup.  Check operation with System hand control. Control Valve • • Level Check connections.  Check for Fails to operate. Sensors proper operation (indicator lights when bucket is empty). 11 • LV Booms Check for proper assembly.  Make Cannot be secured. and Struts sure all quick-release pins are secured. • • Boom Check for missing or compressed Missing, or leaks Kamlock gaskets.  Check for leaks. exceed Class II. Gaskets • • Spray Check for leaks using water. Leaks exceed Class II, Nozzles Check for correct/uniform spray or spray produces pattern.  If threads are stripped excessively large or body cracked, refer to unit droplets. maintenance. 12 • • ULV Boom Check for secure attachment, Not secured, or broken. broken, or missing parts. Quick-release pins should be fully engaged. • • Boom Check for missing or compressed Missing, or leaks Kamlock gaskets.  Check for leaks. exceed Class II. Gaskets • • Liquid Check for leaks at all connections. Leaks exceed Class II. Pesticide Lines • • Nozzles Check for leaks using water. Leaks exceed Class II. 2-12 INTERVAL ITEM NO. Item To Be Inspected EQUIPMENT IS NOT READY/AVAILABLE IF: Procedures