|
| |
Back
REPLACE SNAP FASTENERS | Up
TM-10-8415-210-13P Toxicological Agent Protective (TAP) Ensemble Manual | Next
Installing Male Section |
TM 10-8415-210-13&P
b.
Installing Female Section.
(1)
Cut a hole in the material (1), using a tube of the revolving punch (2). The hole should be small enough
for a tight fit around the barrel of cap (3).
(2)
Insert the barrel of cap (3) through the hole in the material (1).
(3)
Place the inserted cap (3), barrel up, on the anvil (4).
(4)
Fit the socket (5) over the barrel of cap (3).
(5)
Place the cap-and-post set on the barrel of the cap (3), and clinch the cap (3) and socket (5) to the material
(1) with a hammer blow.
5-11
|
