Table 3-1. Unit Troubleshooting

TM 10-8415-208-12 Table 3-1. Unit Troubleshooting MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION 1 Tether Line Leaks Step 1. Check the tether line and adapter fitting connections for tightness Tighten all loose connections Step 2. Inspect male pipe thread of adapters F101 and F102 for missing or worn anti-seize tape Apply new anti-seize tape Step 3. Check tether line and adapter F101 female connections for damaged or missing preformed packing Replace the tether line or adapter Fl 01 as necessary. Refer to paragraph 3-7. 2. 1 Step 4. Inspect the hoses for cuts, holes or punctures Replace damaged tether line. Refer to paragraph 3-7. 2. 1 Step 5. Tether line continues to leak Replace the complete tether line. Refer to paragraph 3-7. 2. 1 2. Encapsulating Protective Suit Visual Defects Step 1. Pressure test the suit. Refer to paragraph 3-6. 4 Patch any repairable defects or replace damaged components Refer to paragraph 3-6. 3. 1 Step 2. Defects not repairable Replace the suit. Notify your supervisor 3-6