T.O. 33B-1-1 Table 1-3. Frequency for Process Control LIQUID PENETRANT INTERVAL PG PARA Crack Chrome Panels/Material Determined By Workload 1-32 1.5.4.2 Performance Developer Specific Gravity/Water 7 Days 1-41 1.5.5.6.1 Soluble Remover Contamination Check 30 Days 1-37 1.5.5.4.1.1 Remover Performance Check 30 Days 1-37 1.5.5.4.1.2 Spray Remover Concentration Check 30 Days 1-38 1.5.5.4.2.1 Wash Nozzle Check/Spray Angle 30 Days 2-51 2.5.4.5.2.4 Penetrant Brightness/Depot; Optional 30 Days 1-34 1.5.5.2.2b Field Penetrant Wetability/Surface Wetting 90 Days 1-34 1.5.5.2.2a Water Content Test/Hydrophilic 90 Days 1-36 1.5.5.4 Remover Dryer Temperature 180 Days 1-25 1.5.2.10 Quality Conformance Test (New Solution) 1-30 1.5.3.4 MAGNETIC PARTICLE TESTING INTERVAL PG PARA Concentration/Suspension Settling Test Determined by Workload 1-44, 1.6.4, 3-69 3.5.6.8 Determination of Vehicle Fluorescence In Conjunction with Suspension 3-74 3.5.7.5.2 Settling Test System Effectiveness Test Minimum of Once Every 7 Days 1-48 1.6.10 Ambient Light Check PT & MT 60 Days 1-27 1.5.2.12c Black Light Intensity PT & MT Daily or Prior to Use 2-79 2.7.4.1.5 Amperage Indicator Check 6 Months 1-49 1.6.11 Quick Break 60 Days 1-50 1.6.12 WATER MPI BATH ONLY INTERVAL PG PARA Water Break Test Daily 3-26 3.3.6.1 MAGNETIC PARTICLE PORTABLE INTERVAL PG PARA Dead Weight 30 Days 1-46 1.6.7.2c EDDY CURRENT INTERVAL PG PARA Probe Sensitivity/Signal To Noise Ratio Per Inspection Check 4-51 4.5.2.8 ULTRASONIC INSPECTION INTERVAL PG PARA Vertical Linearity Determined By Lab Supervisor 1-57 1.8.2.1 Horizontal Linearity Determined By Lab Supervisor 1-58 1.8.2.2 Sensitivity Check Determined By Lab Supervisor 1-59 1.8.2.3 1-16 Change 3