|
| |
| Up
TM-1-1500-335-23 Nondestructive Inspection Methods Manual | Next
FIGURE 1-1 NONDESTRUCTIVE INSPECTION FACILITY |
T.O. 33B-1-1
1-1
CHAPTER 1
SECTION I
GENERAL INFORMATION
1
GENERAL INFORMATION
1.1
INSPECTION FACILITY
1.1.1
Introduction
This section describes a typical Nondestructive Inspection (NDI) facility. Figure 1-1 is a typical floor plan showing the
minimum requirements for such a facility. A larger or modified facility may be warranted depending on the particular
weapon system(s) serviced. Use of the floor plan and the associated notes should be used in conjunction with both the
applicable manufacturer’s installation instructions for the equipment required and the information provided in the
radiation protection section of Chapter 6 of this technical order.
|
