Section II. OPERATION UNDER USUAL AND UNUSUAL CONDITIONS

TM 11-6130-413-12

Control or Indicator

Function

Control or Indicator

Function

timer (Ml) is operating.

matic charging; or for manual

Powercord(P3) . . . . . . . . . . . . . P r o v i d e s connection to local

charging.

power source.

Run indicator (DSl). . . . . . . . . . Amber lamp indicates the

Battery connector (J5) . . . . . . . Provides connection to battery.

AUTO/MAN CHARGE No. 2

Section II. OPERATION UNDER USUAL AND UNUSUAL CONDITIONS

CAUTION

3-3. Operating Procedures

Before you connect any nickel-cadmium bat-

The following are the complete normal operating

tery to the charger/analyzer, determine the

procedures. For operational checkout procedures after

correct charge/discharge rates and safety pre-

installation, servicing or as a periodic check, refer to

cautions by referring to the appropriate bat-

paragraph 4-8. Connect dc output connector J5 to the

tery manual (TM 11-6140-203-14-2, TM

known good battery, connect ac connector P3 to the lo-

11-6140-203-14-3, or TM 11-6140-203-

cal ac power source, then perform the following pro-

15-1).

cedures:

Figure 3-1. Controls and Indicators.

3-2