Figure 3-1. Battery charger component locations, front panel

TM 1141-361-14-14

(2) Grasp the flange of the indicator lamp

(5) Install the lens and lamp; the the lens

clockwise until it is screwed onto the indicator

with fingernails and pull the indicator lamp out

light socket

from the lens.

b. Replacement of

Plug

Connector

(3) Insert the new indicator lamp into the

P60001. Replacement of plug connector P8001 is

lens.

power cable wires and removing the wire. The

(4) Install the O-ring over the threaded

wires are then secured to their respective pins on

portion of the indicator light socket. Replace the

the replacement connector.

Wing if damaged.

Figure 3-1. Battery charger component locations, front panel

3-4