 |
|||
|
|
|||
|
Page Title:
Section XXII. PLGR ANTENNA AND CABLE INSTALLATION (WITHOUT BOLT-ON ARMOR) |
|
||
| ||||||||||
|
|
  TB 9-2320-280-35-9
Section XXII. PLGR ANTENNA AND CABLE INSTALLATION (WITHOUT BOLT-ON ARMOR)
NOTE
· Perform this procedure only when installing additional PLGR
antenna when MTS is installed.
· Drilled holes on inside and outside of windshield frame should
align to allow routing of PLGR cable through windshield frame.
· Relocate all caution labels as necessary.
22-1. Using PLGR antenna mount bracket as template, locate, mark, and drill two 0.50-in. holes (3) in
outer windshield frame (1).
22-2. Locate, mark, and drill one 0.375-in. diameter hole (2) in outer windshield frame (1).
2
1
3
3
0.75
3.00
Figure 5-55.
22-3. Locate, mark, and drill one 0.375-in. diameter hole (4) in left-side inner windshield frame (5).
4
5
1.25
~
5.12
Figure 5-56.
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals