 |
|||
|
|
|||
|
Page Title:
Section XXIII. QEAM MOUNTING: ANTENNAS AND BRACKETS - continued |
|
||
| ||||||||||
|
|
  TB 9-2320-280-35-10
23-2. Using QEAM rack (4) as template, locate, mark, and drill four 0.344-in. diameter holes (9) in roof of
vehicle (14).
23-3. Mark location for four QEAM spacers (8) and apply RTV sealant to marked areas (10).
NOTE
Allow RTV to cure for 30 minutes.
23-4. Press four spacers (8) onto roof of vehicle (14).
23-5. Position QEAM rack (4) over holes in four spacers (8).
23-6. Apply RTV to four bolt holes (9) and insert four bolts (6) and washers (7) in QEAM carrier.
23-7. Apply RTV to one side of four washers (11). Press washers (11) in place.
23-8. Install lockwasher (12) and nut (13).
6
7
4
~
8
9
10
11
12
13
14
6.
SCREW B1821BH031C300N QTY. 4
7.
WASHER 120393 QTY. 4
8.
SPACER, QEAM (PART OF PKMM 000-006) QTY. 4
11.
WASHER 120393 QTY. 4
12.
LOCKWASHER MS45904-72 QTY. 4
13.
NUT MS51967-6 QTY. 4
Figure 5-64.
5-47
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals