TM-1-1500-204-23-30001.gif
TM-1-1500-204-23-30002.gif
TM-1-1500-204-23-30003.gif
TM-1-1500-204-23-30004.gif
TM-1-1500-204-23-30005.gif

Tm-1-1500-204-23-3

• Chapter 1 Introduction
• Chapter 2 Fuel Systems
• Table 2-1. Critical Characteristics And Specification Requirements
• Table 2-2. Avgas Identification
• Table 2-3. Visual Contaminant Characteristics
• Visual Contaminant Characteristics -Cont
• Fuel System Maintenance.
• Table 2-4. Support Clamp Spacing
• Figure 2-4. Auxiliary (Booster) Fuel Pump
• Fuel Strainers.
• Table 2-5. Serviceable Limits (Self-Sealing Cells)3
• Serviceable Limits (Self-Sealing Cells) -Cont
• Serviceable Limits (Self-Sealing Cells) -Cont
• Table 2-6. Serviceable Limits (Bladder-Type Cells)-Cont
• Serviceable Limits (Bladder-Type Cells)-Cont
• Serviceable Limits (Bladder-Type Cells)-Cont
• Maintenance
• Alternate Method
• General Fuel Cell Cleaning.
• Metal Tank Preservation.
• Depreservation.
• Table 2-7. Mixing Ratios
• Disposition Of Dyed Fuel.
• Aeroquip Corporation Series 3700 And 3750 Quick Thread Couplings.
• Figure 2-18. Straight Flow Ball / Valve-Type Coupling
• Table 2-8. Quick-Disconnect Coupling Inspection Values
• Table 2-9. Typical Fuel System Troubleshooting Chart
• Typical Fuel System Troubleshooting Chart -Cont
•  Location And Size.
• Table 2-10. Safety Precautions
• Method.  
•  Fuel Cell Repair (Goodyear, Loral, Engineer Fabrics).
• Fuel Cell Damage Classification And Repair Limits.  
• Fitting Damage/Finish.
• Figure 2-26. Applying Adhesive Mixture Over Buffed Area
• Figure 2-28. Fabric Cutting, Overlap Damaged Area
• Figure 2-29. Applying Reinforcement Patch
• Figure 2-31. Trimming Away Damaged Areas
• Figure 2-32. Applying Adhesive Over Previous Coat
• Figure 2-33. Filling Cavity With Adhesive Mixture
• Figure 2-34. Centering Wet Patch
• Repair/Replacement Of Internal And External Support Fittings/Hangers
• Fitting Rework
• Fuel Cell Repair (Amfuel, Firestone, Uniroyal).
• Non-Repairable Damage.
• Repairing Fuel Cell.
• Repairing Fuel Cell.
• Internal And External Loose Seams
• Internal And External Loose Seams
• Internal And External Cuts, Tears, Chafing, Scuffs, Or Snags Coating Missing, Cord/Fabric Exposed But Not Torn
• Cuts, Tears, Chafing, Scuffs, Or Snags Torn/Cut Fabric
• External And Internal Surface Hole Repair, Including Through Hole
• Repair/Reattachment Of Internal And External Support Hangers/Loops.
• Fitting Rework
• Table 2-11. Expendable/Durable Supplies And Materials List
• Expendable/Durable Supplies And Materials List -Cont
• Expendable/Durable Supplies And Materials List -Cont
• Chapter 3 Oil Systems
• Table 3-1. Reciprocating Engine Oils
• Oil System Maintenance
• Turbine Engines
• Oil Lines. Rigid Tubing, Flexible Hose, And Fittings
• Figure 3-4. Wet-Sump Lubrication System For Turbine Engines
• Figure 3-6. Oil Filter
• Figure 3-7. Spacers And Screens Oil Filter
• Oil Screens
• Figure 3-9. Oil Screen Types
• Oil Coolers
• Figure 3-10. Reciprocating Engine Oil Cooler
• Figure 3-11. Turbine Engine Fuel/Oil Heat Exchanger Cooler
• Oil Jets.
• Prevention Of Sludge Buildup.
• Periodic Oil Dilution.  
• Cold Weather Maintenance.
• Preservation
• Appendix A References
• Glossary
• Index
• Index -Cont
• Index -Cont
• Index -Cont
• Index -Cont
• Index -Cont
• Index -Cont
• Index -Cont
• The Metric System And Equivalents

Privacy Statement - Press Release - Copyright Information. - Contact Us