FIRST ENGINE START (CPU START)

CAUTION CAUTION TM 1-1510-225-MTF PROCEDURE TROUBLESHOOTING REFERENCE ENGINE CLEARING (CONT) Do not exceed starter limitation of 40 seconds on and 60 seconds off for two starting attempts and engine clearing procedure. Allow 30 minutes off before additional starter operation. 3. IGNITION AND ENGINE START switch - STARTER ONLY (15 sec- onds minimum, 40 seconds maxi- mum). 4. IGNITION AND ENGINE START switch - OFF. FIRST ENGINE START (CPU START) 1. Propeller area - Clear. 2. IGNITION AND ENGINE START switch - ON. IGN ON light illumi- nated and associated FUEL PRESS light extinguished A1-7 If ignition does not occur within 10 seconds after moving the CONDITION lever to LOW IDLE, initiate ENGINE CLEARING procedure. If for any reason the starting attempt is discontinued, the entire starting sequence must be repeated after allowing the engine to come to a complete stop (1 minute minimum). 3. CONDITION lever (after N₁ stabilizes at or above 12% for 5 seconds) - LOW IDLE. E1,J 2-20