c. Type Commander (TYCOM). d. Unit (ship's hull number, UIC, and name). Shore activity (UIC number). e. Workcenter. f. MIP number. g. Nomenclature   (brief   description   of   the system/equipment). h. Equipment status code. 3. Maintenance Index Pages (MIP):  MIPs  are prepared  and  issued  for  each  installed  system or piece of equipment for which PMS support has   been   established.   MIPs   are   basic   PMS reference documents. Each MIP is an index of a  complete  set  of  MRCs  applicable  to  a  ship system, subsystem, and equipment. MIPs (fig. 7-2) contain the following information: 7-3 SHIP   SYSTEM,   SYSTEM,   SUBSYSTEM,   OR   EQUIPMENT Fire   Extinguishing   System,   Fog,   Foam,   and   AFFF 5551 REFERENCE   PUBLICATIONS NAVSEA  S8225-GY-MMA-010 NAVSEA  S9555-AN-MMO-010 DATE May   2000 A  scheduling   aid;   Review   maintenance   requirements.   Omit MRC(s)   which   do   not   apply;   no   feedback   report   required. # Mandatory   scheduling   required. 1.   Inspect   high-capacity  AFFF   injection   station. 1.   Inspect   proportioner   station   FP-180. 1.   Turn  AFFF   proportioner   shaft   by   hand. 2.   Inspect   oil   level   in  AFFF   proportioner. 1.   Inspect   high   capacity  AFFF   injection   station   operation. 2.   Test  AFFF   concentrate   for   seawater   contamination. 1.   Test   operate,   inspect,   and   clean   1000   gpm   AFFF proportioner   station. 1.   Test  AFFF   concentrate   for   seawater   contamination   at FP-180   station. 1.   Clean   and   inspect   hose   reel   stations. 1.   Lubricate  AFFF   injection   pump   bearings. 1.   Test   operate,   inspect,   and   clean  AFFF   FP-180   station. 2.   Lubricate   FP-180   proportioner. NOTE: Accomplish   quarterly   or   after   each   use, whichever   occurs   first. 1.  Accomplish   liquid   foam   quantitative   analysis   at   FP-180 stations. 1.   Change   oil   in  AFFF   injection   station   reducer. 1.   Inspect  AFFF   bilge   sprinkling   system   nozzles. 1.  Accomplish  AFFF   concentration   analysis 1.   Lubricate   high-capacity  AFFF   injection   station   flexible couplings. 1.   Inspect   and   hydrostatically   test   AFFF   station   hose(s).. 46 6UMU N 42 8UNR N 42 8UNQ N B4 6UMV N 80 6DAA N 16 6DAD N 88 8DRU N 44 6UMW N 54 C1TH N 97 8GMG N 44 6UMY N 38 8HQR N 39 6UMZ N 44 6UNA N 10 8NPR N D-1 D-2 W-1 Q-1 Q-2 Q-3 Q-4 Q-5 Q-6R S-2 S-3 S-4 A-1 A-2 A-3 HT2 HT2 HT/DC3 HT3 FN HT/DC3 FN HT3 HT/DC3 HT3 EM3 HT/DC3 FN DCA HT1 HG3 HT3 HT/DC HTFN/ DCFN HT/DC HG/DC2 HT3 HT/DC2 2FN 0.2 0.2 0.4 2.0 0.5 2.0 0.5 2.0 0.5 0.3 0.3 2.0 0.5 0.7 0.4 0.4 1.0 1.0 0.7 0.4 0.8 0.3 0.6 None None None None None None None Q-1 None D-2# Q-3# Q-4# or R-1# None None D-1# Q-1# Q-4# or R-1# None None 4 4 4 4 MAINTENANCE   REQUIREMENT   DESCRIPTION SYSCOM   MRC CONTROL   NO O T H E R T E S T PERIO- DICITY CODE RATES MAN HOURS RELATED MAINT- ENANCE DISTRIBUTION   STATEMENT   D Distribution   authorized   to   DOD   components   and   DOD   contractors   only;   critical   technology;   May   1994.   Other   requests   for   this document   shall   be   referred   to   Naval   Sea   Systems   Command   (SEA  04TD).   Destroy   by   any   method   that   will   prevent   disclosure   of contents   or   reconstruction   of   the   document. MAINTENANCE   INDEX   PAGE   (MIP) OPNAV   4790/85 (REV.2-82) PAGE   1   OF   2 SYSCOM   MIP   CONTROL   NUMBER   5551/011-54 ABEf0702 Figure 7-2.—Maintenance Index Page (MIP).