Figure 1-1.—Eye-protection devices

shape) on the body belt. When you are at working position, you unsnap one end of the safety strap, pass it around the supporting structure so there is no danger of its slipping (at least 18 inches from the top of the part on which it is fastened), and hook it to the right D-ring on the body belt. The safety strap must be placed around a part of the structure that is of sufficient strength to sustain an ABs weight and his or her equipment, and must rest flat against the surface without twists or turns. It must not be placed around any part of a structure that is being removed. Before placing your weight on the strap, determine VISUALLY that the snap and D-ring are properly engaged. Do not rely on the click of the snap-tongue as an indication that the fastening is secure. The body belt and safety strap require inspection before use. Look for loose or broken rivets; cracks, cuts, nicks, tears or wear in leather; broken or otherwise defective buckles, such as enlarged tongue-holes, defects in safety-belt snap hooks and body belt D-rings. If you discover any of these or other defects, turn in your equipment and replace it. Perform maintenance periodically according to applicable procedures. Remember that leather and nylon belts are treated in different manners. 1-3 Figure 1-2.—Gas and electric-arc welding gloves. Figure 1-1.—Eye-protection devices. Figure 1-3.—Safety equipment.