REVIEW NUMBER 6

jettisoning circuits. To prevent possible explosion, do NOT expose airborne rockets or loaded launchers to the exhaust from jet engine starter pods or gas turbine compressors. A minimum distance, as indicated on the unit, must be maintained between the gas turbine exhaust path and rocket assemblies upon which the exhaust impinges. In the absence of specific information on the unit, a minimum distance of 10 feet must be maintained. Rockets should NOT be loaded or unloaded from launchers while on the flight deck. RF barriers should remain in place on the launcher while on the flight deck. The detent pin must be in the breaker switch at all times. The only exceptions are when you are making certain electrical checks, or when the aircraft is ready for flight. Do NOT, under any circumstances, perform an electrical test with rockets in the launcher. Q1. Q2. Q3. Q4. REVIEW NUMBER 6 If you are working around rockets or loaded pods, the preferred position is . Smoking is not permitted within what minimum range of rocket ammunition? What is the maximum distance that a rocket motor can be dropped and still be used as a serviceable motor? What minimum distance must be maintained between gas turbine exhaust paths and rockets? 2-31