AN/AWM-42A FUZE FUNCTION CONTROL TEST SET

Adapter retainer assembly Technical manual Figure 16-4.—AN/AWM-42A fuze function control test set. A battery charger (not shown) is also available, but you need to order it separately. The AWM-54 test set weighs about 7.5 pounds. It has a strap you can place around your waist for carrying the set. Several accessory adapter assemblies are available for the test set. These adapters allow you to connect the test set to various armament configurations found on different aircraft. Some aircraft require only one or two adapter assemblies while others require five or six. These adapters are not furnished with the test set; they must be ordered separately. AN/AWM-42A FUZE FUNCTION CONTROL TEST SET The AN/AWN-42A fuze function control test set (fig. 16-4) is used to check the dc fuzing capabilities of fuze function control circuits. You use it to check for continuity and resistance in the electric fuzing. The test set has its own power source. The AN/AWM-42A fuze function control test set is used on all Navy and Marine Corps aircraft that have electric fuzing capabilities. TTU-304/E GUIDED MISSILE TEST SET The TTU-304/E guided missile test set (fig. 16-5) is used during prior-to-launch procedures for checking the tone and missile lock-on operability of the guidance control group of the Sidewinder missile. The TTU-304/E guided missile test set is used on all Navy aircraft that have Sidewinder missile capabilities. Figure 16-5.—TTU-304/E guided missile test set. 16-3