Chapter 1 Utility Systems

• Anti-G System
• Pressure Regulating (Anti-G) Valves
• Anti-G Valve Operation (Single Stage)
• Anti-G System Maintenance
• Vent-Air System
• Deice/Anti-Icing Systems
• Distributor Valves
• Deice Boot System.
• Pressure Regulator And Relief Valve
• Deice And Anti-Icing Systems For The S-3 Aircraft
• Ice Protection System
• Deice And Anti-Icing Systems For The S-3 Aircraft-Cont.
• Deice Pressure Regulating Valve
• Deice Pressure Regulating Valve
• Bleed-Air Solenoid Valve
• Engine Anti-Icing System
• Bleed-Air Leak Detection
• Internal Stores Heating System
• Radar Liquid Cooling System
• Liquid-To-Air Heat Exchanger
• Waveguide Pressurization System
• Missile Liquid Cooling Utility System
• System Operation
• Missile Coolant Pump
• Missile Air-Moisture-Contaminant Remover
• Maintenance Safety Precautions
• Windshield Wiper Utility System
• Windshield Washer System
• Fire Extinguishing Utility Systems
• Rain Repellent System
• System Operation/Components
• Container Assembly
• Thermal Radiation Protection Utility Systems
• Thermal Radiation Protection Utility Systems-Cont.

Chapter 2 Canopy Systems

• System Operation
• Auxiliary Opening Mode
• Canopy Pneumatic Control Module
• Auxiliary Unlock Pneumatic Release Valve
• Canopy Emergency Jettison System
• System Operation
• Sliding Canopy System
• Emergency Canopy Jettison System
• System Components
• Canopy Seal System
• System Operation
• Canopy Seal Pressure Regulator
• Electrically Actuated Canopy Pressure Seal System
• Electrically Actuated Canopy Pressure Seal Regulator Valve
• Frangible Escape Canopy Systems
• Troubleshooting Chart For Electrically Actuated Canopy Seal System
• External Canopy And Hatch Jettison Initiator
• Internal Canopy And Hatch Jettison Initiator
• Shielded Mild And Flexible Confined Detonating Cords
• Canopy And Hatch Explosive Charge
• Smdc One-Way Transfer
• Cartridges And Cartridge- Actuated Devices (Cad)
• Expiration Dates
• Service-Life Extension
• Cad Maintenance Policy
• Standard Smdc/Fcdc Tip Assembly
• Smdc Clearance
• Booster Tip And Ferrule Inspection
• Booster Tip Repair
• Reporting
• Ordnance Certification Program
• Ordnance Certification Program-Cont.
• Pneumatic Canopy System (Normal Opening Mode)
• Pneumatic Canopy System (Normal Opening Mode)-Continued
• Pneumatic Canopy System (Normal Opening Mode)-Continued
• Pneumatic Canopy System (Normal Opening Mode)-Continued

Chapter 3 Pressurization And Air-Conditioning Systems

• Environmental Control Systems
• Bleed-Air System
• Air Cycle Air-Conditioning Systems
• Flow Modulating System Pressure Regulator Valve
• Condenser/Vent Suit Heat Exchanger
• System Testing
• Thermal Compensator
• Flexible Line Connectors
• Installation Of Flexible Line Connectors
• Installation Of Rigid Line Couplings
• Cabin Cooling And Antifog Systems
• Cabin Cooling And Antifog System
• Cabin Defog Plenum Distribution Valve
• Manual Temperature Control
• Vapor Cycle Air-Conditioning System
• Vapor Cycle Theory
• Vapor Cycle Air-Conditioning System
• Evaporator Assembly
• Operations And Components-Cont.
• Subcooler
• Thermostatic Expansion Valve
• Evaporator And Thermostatic Expansion Valve.
• Evaporator
• Oil Separator
• Condenser Ejector Air Shutoff Valve
• Servicing Equipment
• Sh-60b Helicopter Environmental Control Systems (Ecs)
• Environmental Control System
• Aircraft Pressurization Systems
• System Operation
• Cabin Pressurization Subsystem Schematic
• Cabin Pressure Regulator Valve
• Cabin Pressure Regulator Control
• Electrical Failures
• Troubleshooting-Cont.
• Multimeter Troubleshooting Skills
• Multimeter Safety Precautions
• Resistance Test
• Bleed-Air System
• Bleed-Air System-Continued
• Bleed-Air System-Continued
• Bleed-Air System-Continued
• Air Cycle Air-Conditioning System
• Air Cycle Air-Conditioning System-Continued
• Air Cycle Air-Conditioning System-Continued
• Air Cycle Air-Conditioning System-Continued
• Avionics Cooling System
• Avionics Cooling System-Continued
• Avionics Cooling System-Continued
• Avionics Cooling System-Continued

Chapter 4 Oxygen Systems

• Characteristics Of Oxygen
• Effects Of Hypoxia
• Gaseous Oxygen Systems
• Cylinders
• Tubing
• Valves
• System Operation
• System Maintenance
• Gaseous Oxygen System Troubleshooting
• Liquid Oxygen (Lox) Systems
• Safety Precautions
• System Components
• Pressure Control Valve
• Heat Exchanger
• Oxygen Regulators
• Cutaway View Of Miniature Oxygen Regulator
• Aircraft-Mounted Oxygen Regulators
• Md Regulator Operational Drawing
• Turnaround/Preflight/Post- Flight/Transfer Inspections
• Troubleshooting (Daily, Preflight, Special, Turnaround, Transfer And Acceptance Inspections)
• System Operation
• Liquid Oxygen Converter Operation
• System Maintenance
• Onboard Oxygen Generating System

Chapter 5 Oxygen Support Equipment

• Transfer Lines
• Oxygen Servicing Equipment
• Safety Precautions
• Description
• Tmu-70/M Liquid Oxygen Servicing Trailer Controls And Indicators
• Operation
• Operating Instructions For Tmu-70/M
• Periodic Inspection
• Transfer
• Maintenance
• Contamination Control
• Sample Taking
• Purging
• Description
• Gaseous Oxygen Servicing Trailers
• Lower Manifold
• Installation Of Full Cylin- Ders
• Replacement Of Drying Agent
• Gaseous Oxygen System Servicing
• Servicing A High-Pressure Oxygen System

Chapter 6 Ejection Seat Systems

• Ejection Seat System Sequencing Schematic
• System Description-Cont.
• Ejection Seat
• Ejection Seat Assembly
• Yaw Thruster
• Seat Control System
• Seat Adjustment Actuator And Motor Assembly
• M99 Initiators
• M53 Initiator
• Aircraft Mounted Cad’s
• Group Eject Indicators
• Functional Description
• Pilot/Nfo Window-Severance Linear Shaped Charge
• Window/Hatch Internal Jettison Handle/ Initiator
• Maintenance Requirements
• Ejection Control Safety Handle
• Rocket Catapult To Seat Connections
• Firing Control Disconnect Fitting And Pin
• Secondary Ejection Control
• Power Inertia Reel
• Emergency Survival Equipment
• Cartridges And Cartridge- Actuated Devices (Cads)
• Function
• Inspection Of The Rocket Catapult
• System Operation
• Ejection Seat Sequencing Schematic
• System Components
• Martin-Baker Sju-5/A Ejection Seat.
• Main Beam Assembly
• Time-Release Mechanism
• Aircraft Seat Parachute
• Rocket Motor
• Manual Override System
• Sku-3/A Survival Kit
• Component Operation
• Inertia Reel Assembly
• Manual Override System
• Drogue Gun Check-Out
• Firing Pin Cocking Test
• Time Delay Check-Out
• Barostat Check-Out
• Other Tests
• Stencel Sju-8/A Ejection Seat
• Sju-8/A Ejection Seat Assembly (Front View)
• Sju-8/A Ejection Seat Assembly (Back View)
• System Operation
• Ejection Mode Sequences
• Mode I
• Mode 1: Low Speed/Low Altitude
• Mode 2: High Speed/Low Altitude
• Mode 3
• Mode 4: High Speed/High Altitude
• Emergency Parachute Operation And Seat Separation
• Subsystems
• Catapult Cartridge
• Catapult Tube Assemblies
• Dart Stabilization Subsystem
• Headrest And Drogue Container Assemblies
• Ground Emergency Egress
• Survival Kit Assembly
• Component Maintenance
• Emergency Release Handle Assembly Check-Out
• Emergency Release Handle Assembly Check-Out
• Separation Lanyard Retainer Assemblies
• Inertia Reel Assembly Check-Out
• Seat Height Adjustment Actuator Check-Out
• Seat Height Adjustment Actuator Check-Out
• Airspeed/Altitude Sensor Check-Out
• Table 6-1.—Ttu-205-C/E Tester Control Settings
• Lubricating Procedures
• Corrosion Control
• Metal Removal

Appendix I Glossar

• Appendix I Glossary-Cont.

Appendix Ii References

• Appendix Ii References-Cont.
• Appendix Ii References-Cont.
• Appendix Ii References-Cont.

Index

• Index-Cont.
• Index-Cont.
• Index-Cont.
• Index-Cont.
• Index-Cont.
• Index-Cont.

Assignment Questions

• Errata No.2
• Errata No. 2-Cont.
• Assignment 1
• Assignment 1-Cont.
• Assignment 1-Cont.
• Assignment 1-Cont.
• Assignment 1-Cont.
• Assignment 1-Cont.
• Assignment 2
• Assignment 2-Cont.
• Assignment 2-Cont.
• Assignment 2-Cont.
• Assignment 2-Cont.
• Assignment 2-Cont.
• Assignment 2-Cont.
• Assignment 3
• Assignment 3-Cont.
• Assignment 3-Cont.
• Assignment 3-Cont.
• Assignment 3-Cont.
• Assignment 3-Cont.
• Assignment 3-Cont.
• Assignment 4
• Assignment 4-Cont.
• Assignment 4-Cont.
• Assignment 4-Cont.
• Assignment 4-Cont.
• Assignment 4-Cont.
• Assignment 4-Cont.
• Assignment 4-Cont.
• Assignment 4-Cont.
• Assignment 5
• Assignment 5-Cont.
• Assignment 5-Cont.
• Assignment 5-Cont.
• Assignment 5-Cont.
• Assignment 5-Cont.
• Assignment 5-Cont.
• Assignment 5-Cont.
• Assignment 6
• Assignment 6-Cont.
• Assignment 6-Cont.
• Assignment 6-Cont.
• Assignment 6-Cont.
• Assignment 6-Cont.
• Assignment 6-Cont.
• Assignment 7
• Assignment 7-Cont.
• Assignment 7-Cont.
• Assignment 7-Cont.
• Assignment 7-Cont.
• Assignment 7-Cont.
• Assignment 7-Cont.
• Assignment 8
• Assignment 8-Cont.
• Assignment 8-Cont.
• Assignment 8-Cont.
• Assignment 8-Cont.
• Assignment 8-Cont.
• Assignment 9
• Assignment 9-Cont.
• Assignment 9-Cont.
• Assignment 9-Cont.
• Assignment 9-Cont.
• Assignment 9-Cont.

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing