REFER,  the  new  DDSN  will  also  be assigned an LSC of REFER. — Creates a requisition record. — Prints   DD   Form   1348-1   at   designated location except those requisitions with LSC of refer assigned. l   Process POD for all bits and piece parts received before  releasing  the  components  from  the  AWP locker. Use conversation code N615 to process receipts. —    P r i n t s    t h e    N O    R E Q U I S I T I O NS OUTSTANDING NOTICE if the receipt is the  last  item  required  for  the  AWP component. — Prints the AWP REPAIR PART LOCATOR NOTICE for the component in AWP. — Prints  the  AWP  SHORTAGE  NOTICE  if  the quantity   received   does   not   satisfy   the requirement  completely. l      If all the material requirements are filled, release the  component  from  the  AWP  locker  back  to repair  cycle  by  using  conversation  code  N646. — This transaction updates the MAF record with the job status of WB (in transit from AWP). — The transaction decreases the AWP count. — The   transaction   prints   the   AWP MOVEMENT  NOTICE  to  be  attached  to the  material. The  AWP  recovery  processing  is  performed  as follows: l  Verify  the  CAGE/PN  of  the  item  by  using conversation  code  N679/N203  cross-reference inquiry. (If the CAGE/PN is not in the database, pass the requirement to the technical edit team for loading to the computer.) l   The production control (PC) division of the IMA will  load  MAF  data  (level  2  only)  through conversation  code  N282. o   PC   will   print   and   forward   the   copy   of conversation  code  N217  screen  display  to AWP. .   AWP   verifies   data   in   blocks   H-Z   of   the conversation  code  N217  screen  display  against c o n v e r s a t i o n    c o d e    N 8 3 2    M A I L B OX MESSAGE. l Post the applicable contingency code by using conversation  cede  N605. — Conversation code N605 transaction will add  I-Level  requisition  to  the  database. — The  transaction  creates  supply  interface records. — Conversation  code  N668  status  inquiry should  display  the  assigned  status. l  Process remeipt of the component into AWP by using  conversation  code  N644. l  Stamp and forward screen display printouts of conversation codes N668 and N217 to CCS for filing. — The work center cannot order repair parts for a  component  in  a  WQ  job  status.  All outstanding bits and piece parts must be received and the AWP must release that component using conversation code N646 to  update  the  job  status  to  WB  to  order another  part. — A  message  INVALID  LSC  will  appear  when processing  a  DDSN  in  conversation  code N615 and the DDSN is not in the database or the ROB processing in conversation code N613 has not been completed. — Conversation code N680 displays all repair parts on order against a MAF/JCN. — Use  conversation  code  N608  to  reorder repairable  items  that  were  canceled  by  the supply  system  without  creating  another IOU. — Work center can order quantity that is more than  the  quantity  required  to  repair  a component. However, when the quantity ordered   exceeds   the   value   set   in conversation  code  N020,  the  LSC  assigned will be OFVAL. — Work centers cannot order bits and piece parts if the job status is WT. The job status must be WS or WP to be able to order parts. — An  MCN/JCN  in  WQ  job  status  can  be released when documenting BCM action, repair   because   of   cannibalization,   part removal  for  cannibalization  action,  and 7-21