9-41. As     an     Airman     Apprentice,     you     are     not responsible for maintaining support equipment unless  you  are  striking  for  Aviation  Support Equipment Technician. 1. True 2. False 9-42. Which of the following dangers are associated with operating a MEPP? 1. High fluid pressure 2. High voltage 3. Hot exhaust temperatures 4. Intake suction 9-43. What total number of levels of maintenance are available in naval aviation? 1. One 2. Two 3. Three 4. Four 9-44. What level of aircraft maintenance is responsible for component inspection, disassembly,  repair,  reassembly,  testing,  and fabrication? 1. Organizational 2. Intermediate 3. Depot 9-45. Which of the following publications must you use  to  inspect  support  equipment  prior  to  its use? 1. Maintenance manual 2. Operations manual 3. Maintenance requirements card 4. Preoperational card 9-46. How often must a preoperational card be used when inspecting support equipment? 1. First thing in the morning only 2. Every  other  day  if  the  equipment  has  not been used 3. Prior to the first use of the day and any use thereafter 4. At the end of the day 9-47. Which, if any, of the following functions will be stated on the preoperational card? 1. How to make a minor repair 2. Make adjustments 3. Correct defective conditions 4. None of the above 9-48. What publication governs the Support Equipment  Operator  Training  and  Licensing Program? 1. Naval     Aviation     Maintenance     Program (NAMP), OPNAVINST 4790.2 2. Aviation Support Equipment Technician 3 & 2,  Vols. 1 & 2, NAVEDTRA 12385 3. Aviation Support Equipment Basic Handling   and   Safety   Manual,   NAVAIR 00-80T-96 4. Aviation Support Equipment General Operating  Procedures  Manual,  NAVAIR 17-1-128 9-49. What total number of training phases are there in  the  Support  Equipment  Operator  Training and Licensing Program? 1. One 2. Two 3. Three 4. Four 9-50. Where  would  you  receive  support  equipment phase 1 training? 1. Aboard ship 2. Squadron 3. AIMD sponsored school 4. Support equipment "A" school 9-51. Which    of    the    following    divisions    has    the responsibility    for    monitoring    the    Support Equipment  Operator  Training  and  Licensing Program? 1. Quality assurance 2. Line 3. Support equipment 4. Maintenance 9-52. What   is   the   Support   Equipment   Operator’s License commonly known as? 1. White license 2. SE card 3. Yellow license 4. Operator’s license 9-53. Completion   of   support   equipment   Phase   1 training at an AIMD-sponsored school certifies completion of Phase 1 training only and does not authorize you to operate any given piece of support equipment. 1. True 2. False 9-24