|
| |
Back
SUMMARY-Cont. | Up
Aviation Boatswains Mate E 3 & 2 - Aviation theories and other practices | Next
Appendix I Glossary-Cont. |
APPENDIX I
GLOSSARY
ABE- Aviation Boatswain’s Mate (Equipment).
ABRASION- Wearing away of a surface by friction,
either by motion while in contact with another
part or by mechanical cleaning or resurfacing
with abrasive cloth or compound.
ac— Alternating current.
ACHO– Aircraft handling officer.
ACNO– Assistant Chief of Naval Operations.
ACTIVATE- To put into action mechanically.
ACTUATE- To put into action electrically.
ADP– Automated data processing.
AEL- Allowance Equipage List.
AIMD– Aircraft Intermediate Maintenance
Department.
ALINEMENT- Parts in correct related positions as
specified on manufacturing drawings.
ALRE- Aircraft launch and recovery equipment.
ALREB– Aircraft Launch and Recovery Equipment
Bulletin.
ALREMP– Aircraft Launch and Recovery
Equipment Maintenance Program.
AMBIENT TEMPERATURE- The surrounding
temperature.
APL- Allowance Parts List.
ASO– Aviation Supply Office.
ATMOSPHERIC PRESSURE– The
normal
pressure of the air at sea level (14.7 psi).
AWM- Awaiting maintenance.
AWP- Awaiting parts.
AWR- Automated work request.
BACK OUT- To remove a screw or other threaded
part from its fully torqued or set position.
BINDING- The stopping or the slowing down of
motion between two surfaces because of foreign
matter, poor alinement of ports, unequal
expansion, or unequal wear between surfaces.
BRAZE- To join two metals by intense heat and the
application of a hard solder containing brass.
BRINELLING- A displacement or flow of metal
rather than a loss of metal due to wear.
BULB SIDE- The side of the launching-engine
cylinders that mates directly with the cylinder
covers and is opposite the sealing-strip side,
BUR– A sharp projection of metal from an edge,
usually
the
result
of drilling, boring,
countersinking, and so forth, but may also be
caused by excessive wear of one or both surfaces
adjacent to the burred edge.
CAFSU- Carrier and field service unit.
CALIBRATION- To check, fix, or correct the
graduation of a measuring instrument.
CASREP– Casualty Report.
CAUTION- An emphatic notice requiring correct
operating or maintenance procedures to prevent
damage to equipment.
CCF– Configuration Change Form.
CDI- Collateral Duty Inspector.
CDP- Cross Deck Pendant.
AI-1
|
