OPERATING AND MAINTENANCE INSTRUCTIONS PRODUCTION HEAVY DUTY SPRAY GUNS

OPERATING AND MAINTENANCE INSTRUCTIONS

PRODUCTION HEAVY DUTY SPRAY GUNS

OPERATIONS

CONNECTIONS:

When used with a Siphon Feed Cup, attach the gun to the Fluid Inlet Nipple and connect the Air Hose to the

Air Inlet Nipple (see Fig. 1). When used with a Pressure Feed Tank, Air Hose and Fluid Hose both are required to

connect the Spray Gun to the Tank. The FIuid Hose is Black, the AiI Hose is Red. Attach one end Of the Fluid

Hose to the Fluid Outlet on the Pressure Tank and the other end of the Fluid Hose to the Fluid Inlet Nipple On the

Spray Gun. Attach one ad of the Air Hose to the Air Outlet Valve on the Pressure Tank and connect the other

end of the Air Hose to the Air Inlet Nipple of the Spray Gun (Fig. 1).

Note: It is recommended Air Hose of not Iess that 5/16 I.D. and Fluid Hose of not less than 3/8 I.D. be used.

Never use too small of Air Hose as this Will starve the Spray Gun due to the excessive Pressure Drop in the At-

omizing Air Pressure.