MODEL 31-116 AIR MOTOR DRIVE UNIT INSTRUCTIONS

MODEL 31-116 AIR MOTOR DRIVE UNIT INSTRUCTIONS

This air motor drive unit is designed to be mounted on

Use a high grade gear oil lubricant such as %Moode No

any type 83-fluid pressure tank of five gallon capacity or

600W or American Oil No. 140.

more.

AIR SUPPLY: The air used to operate this unit should

SPEED: The speed of the air motor is regulated by

come from a high pressure source; do not use air that

means of the 73-59 Air Adjusting Valve. The ideal output

has passed through a regulator. For best results, the air

speed of the reduction gear box is 30 to 40 R.P M. It

should have a pressure of at least 60 PSI and should be

should not run faster.

cleaned and dried by being passed through an oil and

water extractor.

LUBRICATION: Worm Gear Speed Reducer-The worm

gear reducer is to be filled to the 31-63 overflow cap and

must be inspected for proper level at least once a month.