MODEL 18 SPRAY GUN

MODEL 18 SPRAY GUN

1/10

The Spray Gun is exceptionally rugged in

construction, and is built to stand up under hard,

continuous use.

However, like any other fine

precision instrument, its most efficient operation

depends on a knowledge of its construction, operation,

and maintenance.

TYPES OF INSTALLATION

SIPHON FEED CUP HOOKUP

Air pressure for atomization is regulated at extractor.

Amount of, fluid is adjusted by fluid control screw on

gun, viscosity of paint, and air pressure.

PRESSURE FEED CUP HOOKUP

For fine finishing with limited spraying.

Air pressure for atomization is regulated at extractor,

fluid pressure at cup regulator. For heavy fluids and

internal mix nozzle spraying, fluid adjusted by control

screw on gun.

PRESSURE FEED TANK HOOKUP

Pressure cup also available less regulator

For portable painting operations.

(Double regulator)

Air pressure for atomization and fluid supply is regulated

by two individual air regulators on tank.

PRESSURE FEED TANK HOOKUP

For medium production spraying.

(Single regulator)

Air pressure for atomization is regulated at extractor,

fluid pressure at tank regulator.

PRESSURE FEED CIRCULATING HOOKUP

For heavy production spraying.

Air pressure atomization regulated at extractor. Fluid

pressure regulated at fluid regulator.