Recoverability Code

allowances in subsequent columns. When the unit

of measure differs from the unit of issue, the lowest

unit of issue that will satisfy the required units of

measure will be requisitioned.

e. Quantity Incorporated in Unit. Indicates the

quantity of the item used in the breakout shown on

(3) Recoverability Code. Indicates whether

the illustration figure, which is prepared for a

unserviceable items should be returned for recovery

functional group, sub functional group, or an

or salvage. Items not coded are nonrecoverable.

assembly. A "V" appearing in this column in lieu of

Recoverability codes are:

a quantity indicates that no specific quantity is

applicable, e.g., shims, spacers, etc.

f. Maintenance Allowances. All items are

authorized for use as required.

g. I l l u s t r a t i o n . T h i s c o l u m n i s d i v i d e d a s

follows :

figure

N u m b e r . Indicates the

(1) Figure

number of the illustration on which the item is

shown.

(2) I t e m N u m b e r . I n d i c a t e s t h e c a l l o u t

number u s e d to reference the item on the

illustration.

4 . Special Information.

a. Usable on codes are included in column 3.

Uncoded items are applicable to all models.

Identifications of the usable on codes used in this

publication are:

b. There are no special tools, test or support

equipment authorized for the AGT 9 or AGT 9A

test stand.

5 . How to Locate Repair Parts.

a . When Federal stock number or reference

number is unknown :

b. Federal Stock Number. Indicates the Federal

(1) Using the table of contents determine the

stock number assigned to the item and will be used

assembly or subassembly within which the repair

for requisitioning purposes.

part belongs. This is necessary since illustrations

c. Description. Indicates the Federal item name

are prepared for assemblies or subassemblies, and

listings are divided into the same groups.

and a minimum description required to identify the

item. The last line indicates the reference number

(2) Find the illustration covering the assembly

followed by the applicable Federal Supply Code for

or subassembly to which the repair part belongs.

Manufacturer (FSCM) in parentheses. The FSCM

(3) Identify the repair part on the illustration

is used as an element in item identification to

and note the illustration figure and item number of

designate manufacturer or distributor or Govern-

the repair part.

ment agency, etc., and is identified in SB 708-42.

(4) Using the Repair Parts Listing, find the

Items that are included in kits and sets are listed

assembly or subassembly to which the repair part

below the name of the kit or set with quantity of

belongs and locate the illustration figure and item

each item in the kit or set indicated in front of the

number noted on the illustration.

item name.

b . When Federal stock number or reference

number is known :

d. U n i t o f M e a s u r e ( U / M ) . I n d i c a t e s t h e

standard or basic quantity by which the listed item

( 1 ) Using the Index of Federal Stock

i s used in performing the actual maintenance

Numbers and Reference Numbers find the per-

function. T h i s measure is expressed by a two-

tinent Federal stock number or reference number.

This index is in ascending FSN sequence followed

character alphabetical abbreviation, e.g., ea, in., pr,

by a list of reference numbers in ascending

etc., and is the basis used to indicate quantities and