 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
  TM 9-4910-458-35P
DIRECT SUPPORT, GENERAL SUPPORT, AND DEPOT
MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST
INTRODUCTION
nance authorized to install the listed
1. Scope.
item. The maintenance level codes
This manual is a list of repair parts and
are:
special tools required for the performance of
Explanation
Direct Support, General Support, and Depot
Maintenance of the automotive generator,
C
Operator/Crew
Organizational Maintenance
O
alternator, and starter test stand.
F
Direct Support Maintenance
General Support Maintenance
H
2. General.
Recoverability Code, column 1C, indi-
(3)
This repair parts and special tools list is
cates whether unserviceable items
divided into the following sections:
should be returned for recovery or
a. Repair Parts List-Section II. A list of
salvage. items not coded are expend-
repair parts authorized for tile performance of
able. Recoverability code is:
maintenance at the direct support, general sup-
Explanation
Code
port, and depot level.
R
Items which are economically repairable
b. Special TO Ols, Test and Support Equip-
at direct and general support maintenance
ment List-Section III. Not applicable.
activities and are normally furnished by
c. Federal Stock Number and Part Number
supply on an exchange basis.
Index-Section IV. An index to illustration
Federal Stock Number, column 2, indi-
b.
figure and item number.
cates the Federal stock number for the item.
indicates the
c. Description, column 3,
3. Explanation of Columns.
Federal item name and a brief description of
The following provides an explanation of
the item. A five digit manufacturer's or other
columns in the tabular lists in section II:
service code and part number or Federal part
a. Source, Maintenance, and Recoverability
number will be included in parentheses within
Codes, column 1, is as follows:
the description column for reference. Repair
(1) Source Code, column 1A, indicates
parts quantities included in the assembly are
the selection status and source for the
shown in front of the part.
listed item. Source codes used are:
d. Unit of Issue, column 4, indicates the unit
used as a basis of issue, e.g. ea, sh, ft, etc.
Code
Explanation
e. Quantity Incorporated in Unit Pack, col-
C
Applied to repair parts authorized for
umn 5, indicates the actual quantity contained
local
procurement.
obtainable
If
not
f r o m local procurement, such repair
in the unit pack.
parts will be requisitioned through nor-
f. Quantity Incorporated in Unit, column 6,
mal supply channels with a supporting
indicates the quantity of repair parts in an as-
statement of nonavailability from local
sembly. The symbol = in this column indicates
procurement.
that the raw material listed is used "as re-
M
Applied to repair parts which are not pro-
cured or stocked but are to be manufac-
quired".
tured at indicated maintenance categories.
g. 30-Day DS/GS Maintenance Allowances,
P
Applied to repair parts which are stocked
columns 7 and 8 are as follows:
i n or supplied from the GSA/DSA, or
Army supply system, and authorized for
(1)
The allowance columns are divided
use at indicated maintenance categories.
into six
subcolumns. Indicated in each sub-
(2) M a i n t e n a n c e Code, column 1B, indi-
column,
opposite the first appearance of each
cates the lowest category of mainte-
item, is
the total quantity of items authorized
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals