|
| |
Back
TRANSMISSION CANNOT BE DOWNSHIFTED FROM HIGH OR INTERMEDIATE RANGE, OR SHIFTED FROM REVERSE RANGE TO NEUTRAL, OR FROM FIRST RANGE TO REVERSE WHILE VEHICLE IS NOT MOVING | Up
TM-9-2520-215-34 Recovery Vehicle Full Tracked: Heavy M88A2 (NSN 2350 01 290 4683) Manual | Next
VEHICLE STEERS PROPERLY IN ONLY ONE DIRECTION |
TM 9--2520--215--34
TRANSMISSION SHIFT SELECTOR VALVE WILL NOT MOVE
0014 00
THIS WORK PACKAGE COVERS:
Transmission Shift Selector Valve Will Not Move
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit, (item 1, WP 0088 00)
Equipment Conditions
Vehicle MASTER switch OFF
(TM 9--2350--256--10 or TM 9--2350--292--10)
WARNING
Remove rings, bracelets, wristwatches,
and neck chains before working on any
vehicle. Jewelry can catch on equip-
ment and cause injury, or may short
across an electrical circuit and cause
severe burns or electrical shock.
Does the shift selector linkage move freely without bind-
ing or sticking?
Check for binding or sticking linkage.
no
yes
Remove, clean and lubricate link-
age. Refer to TM 9--2350--256--20
and TM 9--2350--292--20.
Does selector shaft or valve move
freely without binding or sticking?
Check for binding or sticking
selector shaft or valve.
no
yes
B
Remove or replace faulty
components (WP 0027 00).
Fault corrected.
A
END OF TASK
0014 00--1/2 blank
|
