WARRANTY INFORMATION

TM 9--2520--215--34 0001 00--3 GENERAL INFORMATION – CONTINUED 0001 00 WARRANTY INFORMATION No particular warranty specifically pertains to the XT--1410--4 or XT--1410--5A cross drive Transmissions. NOMENCLATURE CROSS--REFERENCE LIST Nomenclature in this manual was chosen in accordance with the terms used for provisioning as they appear in the Repair Parts and Special Tools List (RPSTL) and Maintenance Allocation Chart (MAC) TM 9--2350--256--20 or TM 9--2350--292--20. A few tools and components are, however, referred to by names more common than those in the RPSTL. In many cases the more shorter name for the same component. OFFICIAL PROVISIONING NOMENCLATURE MORE COMMON NAME Gauge rod Dipstick, Bayonet gauge Safety wire Lockwire Socket head screw key Hex key LIST OF ABBREVIATIONS KPA Kilopascals PSI Pounds Per Square Inch AEPS Army Electronic Product Support MWO Modification Work Order EIR Equipment Improvement Report EIR/MS Equipment Improvement Report And Maintenance Summary EIR/MD Equipment Improvement Report And Maintenance Digest TAMMS The Army Maintenance Management Systems CPC Corrosion, Prevention And Control HRV Heavy Recovery Vehicle MAC Maintenance Allocation Chart RPSTL Repair Parts And Special Tools List QDR’s Quality Deficiency Report MTOE Modified Table Of Organization And Equipment CTA Certified Table Of Allowances APPROX Approximate GAL Gallon RPM Revolutions Per Minute LB -- FT Pound--Feet FT Foot/Feet LB -- IN Pounds--Inches BORE O.D. Bore Outer Diameter BORE I.D. Bore Inner Diameter MIN Minimum UNC Unified Coarse UNF Unified Fine