Figure 50. Tow Bar Assembly

TM 9-2510-247-13&P

0010 00

CONNECTING TO TOWED VEHICLE - Continued

NOTE

If the vehicle being recovered is not equipped with front towing eyes, skip steps

15 through 18.

If PLS System is being towed by M915, insure hitch pin (13) is in the fourth

hole from the top.

16. Install hitch pin (13) through upper tow bar assembly (14) and secure with spring clip (15).

17. Repeat step 13 for remaining tow bar assembly.

18. BOOM EXTEND to raise the lower tow bar assembly (14) until hitch pin (13) seats in lower towbar

assembly (15). Install second hitch pin (18) through both upper and lower tow bar assembly and secure

with spring clip (19) to bolts on lower section of tow bar assembly and tighten.

19. Repeat step 16 for remaining tow bar assembly.

Figure 50. Tow Bar Assembly

0010 00-6

Change 1