TRANSPORT CONFIGURATION

TM 9-2510-247-13&P

0007 00

TRANSPORT CONFIGURATION

The transport configuration will be used to move the fifth wheel towing device when not loaded. This

task assumes the fifth wheel towing device is coupled to a prime mover and transport legs are engaged.

WARNING

Ensure hydraulic protection valve is open (breather switch inline with breather)

prior to operating hydraulics. Failure to comply could cause injury to personnel

or damage to equipment.

Never walk under Booms during any operations. Failure to comply may cause

injury or death to personnel.

CAUTION

Never transport a towed vehicle with the transport legs in the down position.

Failure to comply could cause damage to equipment.

NOTE

The hydraulic pressure release valve is open when the valve control handle is

in line with the breather valve.

1. Set 12-24 volt junction box (1) to proper voltage.

2. Remove electrical control box cover (2) from electrical control box (3) and switch electric

toggle (4) to ON position.

Figure 23. Electric Control Boxes

0007 00-1