WARNING SUMMARY (cont.)

TM 9-2510-247-13&P

WARNING

DRYCLEANING SOLVENT

Drycleaning solvent MIL-PRF-680 Type III is an environmentally compliant low toxic material. However, it may

be irritating to the eyes and skin. The use of protective gloves and goggles is suggested. Use in well

ventilated areas. Keep away from open flames and other sources of ignition. Failure to comply may result in

injury or death to personnel.

Drycleaning solvent, P-D-680, is toxic and flammable. Always wear protective goggles and gloves, and use

only in a well-ventilated area. Avoid contact with skin, eyes, and clothes, and DO NOT breathe vapors. DO

NOT use near open flame or excessive heat. The solvent's flash point is 100oF-138oF (38oC-59oC). If you

become dizzy while using cleaning solvent, immediately wash your eyes and get medical aid. Failure to

comply may result in injury or death to personnel.

Compresssed air used for cleaning or drying purposes, or for clearing restrictions should never exceed 30 psi

(207 kPa). Wear protective clothing (goggles/shield, gloves, etc.) and use caution to avoid injury to

personnel. Failure to comply may result in injury or death to personnel.

WARNING

AIR SYSTEM

Apply antiseize tape only to pipe threads of male fittings of air system or damage to air valves may result.

Failure to comply may result in injury or death to personnel.

DO NOT overtighten or use power tools to tighten fittings taped with antiseize tape. Over tightening could

damage fitting threads and cause connection to leak. Failure to comply may result in injury or death to

personnel.