Figure 1-1. Conversion storage and charging unit, ¾ left front view.

TM 5-3655-210-12

Figure 1-1. Conversion storage and charging unit, ¾ left front view.

1-7.

Tabulated Data

cylinder, ground rod assembly and electrolyte are all

enclosed in this compartment.

e. The chassis and housing completely support

a. Identification. The conversion storage and charging

and cover the storage tank, power compartment, and

unit has four major identification plates. The information

storage, compartment. External clearance lights are

contained on the plates is listed below:

provided on the housing for use during road

(1) Engine plate.

transportation. Internal dome lights are provided in the

power and storage compartments. The chassis is fitted

with air brakes that operate in conjunction with the

Manufacturer............................. Wisconsin Motor Corp.

tractor towing the unit. Manually operated, two speed

Model ..................................................................MTHD

landing jacks are provided to support the front end of

Size (bore; stroke) ............................................ 3 x 3/, 4

the unit. Removable lifting eye covers permits access

(8.255 x 8.256 cm)

to the lifting eye holes at the top of the tank body. The

Specification No ................................................ 147203

four tie-down rings are to be installed in the lifting eye

Serial No .................................................... as assigned

holes when using a crane to lift the unit.

Additional .................................... Operating instructions

1-2