TM 43-0139 Table 3-1.  Dry Film Thickness of Each Applied Coat Specification Pretreatment Coat Prime Coat Intermediate Coat Finish Coat¹ Mils Mils Mils Mils DOD-P-15328 0.3-0.5 - - - MIL-C-22750 - - - min.  1.0³ MIL-C-46168 - - - min.  1.8³ MIL-C-53039 - - - min.  1.8³ MIL-L-52043 - - - 0.8-1.2 MIL-P-14105 - - - 1.5-2.5 MIL-P-15931 - - - 1.8-2.2 MIL-P-23377 - 0.6-0.9² - - MIL-P-24441 - 2.8-3.2 2.8-3.2 2.8-3.2 MIL-P-53022 - 1.0-1.5⁵ - - MIL-P-53030 - 1.0-1.5⁵ - - TT-E-485 - 1.0-1.5 - 1.0-1.5 TT-E-489 - - - 0.8-1.2 TT-E-522 - - - 1.0-1.5 TT-E-527 - - - 0.8-1.2 TT-E-529 - - - 0.8-1.2 TT-E-1593 - - - 1.3-1.7 TT-P-636 - 1.0-1.5 - - TT-P-645 - 1.3-1.7 - - TT-P-664 - 1.0-1.5 - - TT-P-1757 - 0.7-1.0 - - ¹For Army use on exterior surfaces, only forest green lusterless finish coats shall be used, except green 383 shall be the base  color  when  chemical  agent  resistance  is  required.    Interior  surfaces  shall  be  painted  as  specified.    This  does  not apply to camouflage coatings, which shall be painted as specified on applicable patterns. ²For use on nonferrous metals when a chemical agent resistant topcoat will be applied. ³For use when chemical agent resistance is required. ⁴For use on ferrous metals when a chemical agent resistant topcoat will be applied. ⁵For use on ferrous and nonferrous metals when a chemical agent resistant topcoat will be applied. Change 3  3-5