TESTING ENGINE ONLY

TB 9-2350-368-25

TESTING ENGINE ONLY

DESCRIPTION

This task covers: Install (page 4-21). Start (page 4-23). Shutoff (page 4-24). Remove (page 4-24).

INITIAL SETUP

Tools:

General Mechanic's Tool Kit

Engine Sling

Turbocharger Inlet Shield 4910-01-127-7959

Materials/Parts:

Grease

Locknuts (2)

Personnel Required:

Unit Mechanic

Helper

References:

LO 9-2350-247-12

LO 9-2350-261-12

LO 9-2350-277-12

TM 9-2350-247-20-1

TM 9-2350-261-20-1

TM 9-2350-277-20-1

TM 9-2350-366 Series

TM 9-2815-205-34

TM 38-260

Equipment Conditions:

Engine on maintenance stand or blocks

Powerplant test stand blocked

INSTALL

WARNING

Damaged lifting slings can fail with load. Personnel can be killed

or injured. Inspect all slings before use. Do not use damaged

slings.

Hanging loads can kill or injure you. Keep away from hanging

loads and overhead equipment. Keep hands out of area while

engine is being lifted for removal or lowered for installation.

NOTE

OSV has A3 engine and TX200-4/4A transmission.

If testing OSV, refer to TM 9-2350-366 series.

1. Attach engine sling to lifting brackets and lift engine. Have helper assist.

2. Attach appropriate engine sling to lifting device of at least 2,000 pounds (908 kg) capacity.