Figure 2-4. Forklift Pockets

Page Title: Figure 2-4. Forklift Pockets
Back | Up | Next

Web
www.tpub.com

Home

Information Categories

....

Back
Figure 2-3. Frame Assembly Supports--Bottom View

Up
TB-9-2350-368-25 Fabrication and Operation of Powerplant Test Stand Manual

Next
Figure 2-5. Floor Plate Dimensions and Locations

TB 9-2350-368-25

NOTE

Total outside measurement of the forklift pockets must be 36 inches

to fit a standard forklift.

8. From bottom of frame, 26 inches from the end, weld two 9" vertical 2" by 4" supports on internal 2" by 4"

in accordance with Figure 2-4.

9. Center and weld 4" by 6" steel tubing on 9" vertical 2" by 4" supports.

10. Repeat steps 9 and 10 for the second forklift pocket and support.

Figure 2-4. Forklift Pockets

2-5