Figure 3-11. Typical Spray Gun System.

TB 43-0213

NOTE

In some shop applications, it may be

desirable to operate two spray guns from

the same material pump. In such instances,

a tee may be used at the outlet port of the

material filter instead of a direct material

hose connection. The multiple material

hoses are then connected to the two outlet

parts of the tee.

(2) Connect the material hose (black hose) to

the outlet port of the material filter.

(3) Connect the opposite end of the material

hose to the handle of the gun(s).

TA504763

Figure 3-11. Typical Spray Gun System.

TA504765

Figure 3-13. Material Filter

(Direct Mounting).

NOTE

Depending on the installation, the spray gun

handle may be equipped with a Z swivel to

provide greater maneuverability.

f. Once the spray gun system has been connected, .

refer to paragraph 3-8 for information concerning

choice of wands, wand extensions, and assembly to the

TA504764

spray gun.

Figure 3-12. Material Filter

(Remote Mounting).

3-16